Different Kinds Of Floor Insulation

Floor insulation works wonders for your home. Not only will it seal the holes in your floor, it can also reduce the instances of draft in your home. You can save as much as $95 every year in heating costs, as insulated floors keep the warmth inside your home. You can also do it yourself for as low as $160 in materials and equipment. Before you go ahead and install floor insulation all by yourself, you first need to know what type of floors you have.

If you’re interested in keeping your home warm and environment-friendly, here are a few things should know about floor insulation.

Insulating suspended timber floors

As a general rule, older homes usually have suspended timber floors. If you want to make, sure, then visit your basement and look up – if you see wooden joists and floorboard undersides, then it means you have a suspended timber floor. If you have ventilation bricks below your floors, it will further strengthen the conclusion that you have suspended timber floors.

Insulating suspended timber floors is very easy, you just need to lift the floorboards and put mineral wool insulation underneath, in between the wall joists. After replacing your floors, make sure to seal the gaps in between.

You can also insulate your timber floors from below: the basement. Inspect your floor if they have signs of wet rotting. If they don’t, you can go ahead with underfloor insulation. Keep them in place with safety netting.

Insulating solid concrete floors

If you have purchased a relatively new home, then chances are you have solid concrete floors. You just have to place rigid insulation boards on top of your floors. If you want to replace your floors, you can add insulation to your new floors.

Things to remember

Before you put insulation boards on top of every floor in your house, here are some things you need to remember.

You don’t need to insulate floors located above heated areas, such as the living room. Instead, you need to focus on insulating floors above unheated places such as the garage. Chances are you lose a lot of heat through these types of areas.

Apart from insulating your floors, you need to work out on the small cracks and crevices on your floors. Fill the spaces between the floor boards and skirting boards with sealants which you can purchase from your nearby hardware store. These sealants are very cheap, they only cost about $30.

Do you know that it is very easy to insulate your timber floor if there is an unheated cellar or basement space just below, where you can go? Just check the joists which are supporting the floorboards. If they are in good condition and aren’t wet or dry, you can fit in the insulation in between the joists. You can hold them in place with the help of netting if it is required.

For our Melbourne readers, we recommend checking out Foilboard for all your home insulation needs.

Amalfi Slate Roofing is specialized in slate roof repairs, slate roof restorations, contact us today at https://www.melbourneslateroof.com.au/ for any help you require.

We offer one of our most popular high pressure roof cleaning in Melbourne and its neighboring areas. Cleaning roof tiles is one of our specialty, get a free quote today.

Browse our great range of square line gutter replacement and roof repairs in Melbourne from Roof Gaurd Roofing. Contact us for free quote!

For the best roof restoration services, call us today for a free quote.

If you are looking for professional restoration, cleaning services, get in touch with Ultra Finish Roofing for professional services..


Home Orientation Matters

In the design and construction of homes, the orientation matters. Orientation is the position of the house in such a manner as to maximise certain benefits of the elements of nature like cool breezes and sunlight, to achieve a higher degree of comfort at a minimum or a lower cost.

Good Orientation Means Comfortable, Cheaper Homes

Nowadays, most buildings are built to add beauty to the neighbourhood, others are built to carefully place windows aimed at capturing impressive views. With modern trends, it is important that we take into account the positioning of the sun, the direction of the wind, shade and vegetation with respect to the orientation of our homes. Good home orientation boosts energy conservation levels in the home, resulting in a more comfortable and cheaper place to reside.

Requirements of Good Home Orientation.

Good orientation results in a significant reduction in the cooling and heating requirements. Thereby reducing utility bills and minimising greenhouse emissions.
Good orientation for the state of Victoria seeks to exclude the sun during summer, and increase exposure to cool breezes. In winter the opposite is true, maximising sun exposure and sheltering from cold winds.

When choosing a building site for your new home, select a site with an orientation that suits the climatic conditions of your region.

In hot and dry climates, especially when there are no heating requirements, the orientation of the home should be such as to exclude direct sun impact and increase exposure to cool breeze all year round.
In places where ideal orientation cannot be achieved, like in built up urban areas, a home with high energy efficiency can still be achieved with a careful design.

Choosing the Best Home Orientation.

Itemise your cooling requirements in order of priority. Your passive cooling or passive heating requirements will be based on the climate in that region. You can consult an architect or a meteorologist to clarify if you are not sure.

Research the local climate. This will require you to do the following:

  • Check the seasonal and regular temperature ranges
  • Check humidity levels
  • Direction of winds and breeze
  • Characteristics of the seasons
  • What effect has the local geographic features on climatic conditions?

What impact does other buildings and landscape features have on your site?
The true solar north for your region must be established. This is essential for all climatic considerations. Alternatively, using a compass will establish the magnetic north, then subtract or add the magnetic variation for your area to get the solar north.

On purchasing a piece of land, familiarise yourself with that property before erecting any structure. Get to know the position of shades in summer and the position of the sun at noon in winter. This will help you in proper orientation of your home to suit your preferences.

Good orientation of a home involves taking into consideration passive solar gain and passive cooling. Orientation for passive heating is about using the sun as a means of heating the home at no cost, while orientation for passive cooling minimises hot winds and unwanted sun, allowing in cool breezes.
In summary, the orientation of your home should improve the level of comfort significantly, reduce cooling and heating bills and greenhouse emissions resulting from secondary heating.

What is a building surveyor?

Your building surveyor is charged with the responsibility of making sure that all structures are safe. They are also responsible for the energy efficiency and accessibility (including disabled access) impacting on the plans and outcome of the building project.

Although traditionally building surveyors have been employees of the local council, legislation has been introduced to encourage competition and allow private building surveyors to issue building permits and the other duties that a building surveyor is involved in.

A building surveyor is the professional when it comes to building law. He or she is not only the authority when it comes to assessing building plans, but they are trained to understand and interpret building regulations. They have to undertake many recognised qualifications associated with their professional and must also be registered with the local authorities and back backed up by insurance. A custom home builder in Perth

The building surveyor is education in a number of disciplines many now specialise in one of the many specific areas related to building regulation:

  • Disabled Access
  • Fire Safety
  • Energy efficiency
  • Construction law
  • Forensic Inspection
  • Maintenance of services
  • Private Certification
  • Building Materials Science
  • Legislation
  • Alternative Building Solutions

They interact with a wide number of professionals in the building trade. They include engineers, architects and buildings to ensure that the building project is fully compliant from start to finish.

The building surveyor naturally does so much more than merely issuing out building permits. There is actually much work to do before that permit can be issued, and the regulation continues long after that all important permits are granted.

You will also find the building surveyor carrying out pest control inspection to existing buildings to ensure they are safe, and are compliant with current safety standards. The actual survey itself is a comprehensive assessment of the building structure.

A building surveyor also acts as a consultant, more commonly on larger construction projects where more is at stake. They provide regulatory advice on major construction issues that often arise on these major projects.

Because of their in depth regulatory knowledge they are constantly in demand. They days of a building surveyor spending their entire career in a local office government are over. They are found more increasingly on building sites and being involved in project management as well as being involved in access and design compliance as well as other roles. Some progress into ore specialised roles.